HOW TO MIX MELANOTAN 2
These instructions explain how the separate components supplied with Pure MT2 vial and nasal kits are assembled. They do not provide dosage, administration or individual medical guidance.
Melanotan 2 is not a licensed medicine in the United Kingdom, and an appropriate human dosage, clinical safety profile and validated storage period have not been established by UK regulators.
Check that every component is unopened and undamaged before preparation. Do not use any component that appears damaged, discoloured or contaminated. Visual inspection alone cannot confirm sterility.
STEP 1: PREPARE THE COMPONENTS
Check that the MT2 vial and alcohol swab are unopened and undamaged. Place both items on a clean working surface before continuing.
STEP 2: CLEAN THE VIAL
Remove the yellow cap from the MT2 vial. Use the alcohol swab to clean the exposed rubber stopper before inserting the syringe.
STEP 3: PREPARE THE STERILE WATER
Open the sterile water and remove a new syringe from its sealed packaging. Insert the syringe into the sterile water container.
STEP 4: DRAW THE STERILE WATER
Slowly draw 1ml (1 full syringe) of sterile water into the syringe. Check the measurement against the markings on the side of the syringe.
STEP 5: ADD THE WATER SLOWLY
Insert the syringe through the vial’s rubber stopper. Slowly depress the plunger to add the full amount of sterile water to the vial.
STEP 6: MIX GENTLY
Gently rotate the vial until the powder appears fully dispersed. Do not shake it. Do not continue if the liquid appears discoloured, unusually cloudy or contains visible particles. Visual inspection cannot confirm sterility.
PREPARING AN MT2 NASAL SPRAY KIT
After preparing the MT2 vial using Images 2 to 7 above, continue with Images 8 to 11 to transfer the mixture into the nasal spray bottle and complete the preparation process. These additional steps apply only to unmixed nasal spray kits.
STEP 1: WITHDRAW THE MIXTURE
Using your syringe, withdraw the prepared mixture from the MT2 vial.
STEP 2: TRANSFER TO THE NASAL BOTTLE
Remove the top from the nasal spray bottle and carefully transfer the prepared mixture into it.
STEP 3: ADD THE REMAINING WATER
Carefully add the remaining sterile water directly to the nasal spray bottle.
STEP 4: COMPLETE THE PREPARATION
Secure the spray top and gently rotate the bottle to combine the contents. Do not shake it. Do not continue if the liquid appears discoloured, unusually cloudy or contains visible particles. Visual inspection cannot confirm sterility.
STORAGE AND HANDLING LIMITATIONS
Keep unopened components sealed, dry and protected from direct sunlight. Follow any storage information printed on the individual component packaging.
Pure MT2’s current laboratory analysis records the identity, measured content and reported purity of the submitted MT2 sample. It does not assess stability after preparation, microbial contamination or sterility, and it does not establish a validated expiry period for a mixed vial or nasal bottle.
Refrigeration may slow some forms of degradation, but it does not prove that a prepared product remains sterile or suitable for use. Do not rely on universal online claims stating that every mixed peptide remains usable for a particular number of days or months.
Keep all components out of the reach of children. If packaging is damaged, storage conditions are uncertain or a prepared liquid changes appearance, do not continue using it.